[New Dumps] Are You Ready for Cisco CCNP Wireless 300-360 Dumps Exam Training Resources And Youtube (Q1-Q12)

Are you ready for Cisco CCNP Wireless 300-360 dumps exam? Get the latest Cisco CCNP Wireless 300-360 dumps pdf training resources and study guides free download from lead4pass. Helpful newest Cisco CCNP Wireless 300-360 dumps pdf materials and vce youtube demo update free shared. “Designing Cisco Wireless Enterprise Networks” is the name of Cisco CCNP Wireless https://www.lead4pass.com/300-360.html exam dumps which covers all the knowledge points of the real Cisco CCNP Wireless. The best useful Cisco CCNP Wireless 300-360 dumps exam practice questions and answers free download, 100% success and guarantee to pass Cisco 300-360 exam test easily at first try.

Best Cisco 300-360 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRbXA1TGRTOW5TYkE

Best Cisco 300-320 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRU3Y3elpyNldxUU0
300-360 dumps

Cisco CCNP Wireless 300-360 Dumps Exam Real Questions And Answers (1-12)

QUESTION 1
An engineer is tuning RRM parameters to improve client connectivity. Which channel band results in the best 802.11n client compatibility?
A. UNII-2
B. UNII-2e
C. UNII-3
D. UNII
E. UNII-1
Correct Answer: E

QUESTION 2
An engineer is installing a wireless network in an industrial area with extreme temperatures and a significant amount of dust. Which enclosure should be used to protect the APs?
A. ACU
B. ADU
C. NEMA
D. WLSE
Correct Answer: C

QUESTION 3
What are two advantages of conducting an active survey versus a passive survey when verifying RF coverage? (Choose two.)
A. verifies packet loss
B. verifies roaming
C. verifies SNR
D. verifies signal level
E. verifies interferers
Correct Answer: AB

QUESTION 4
An engineer is deploying an outdoor Mesh network. 300-360 dumps Which four major factors should be considered? (Choose four.)
A. power
B. buildings
C. traffic lights
D. satellite dishes
E. line of sight
F. network connectivity
G. power lines
H. mounting
Correct Answer: AEHF

QUESTION 5
A customer has deployed an N+N redundant wireless infrastructure. In this deployment the access points have been salt and peppered between controllers.
What configuration would be necessary to cut down on the use of mobility tunnels for voice clients?
A. mobility anchor
B. KIS based CAC
C. media session snooping
D. re-anchor roamed voice clients
Correct Answer: D

QUESTION 6
Which two steps are associated with the active portion of the audit when a post-installation audit is performed with an auditing tool such as Ekahau? (Choose two.)
A. Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.
B. Verify smooth roaming.
C. Check to see if the signal level on other access points that are heard on the same channel is at least 19dBm weaker than the access point that you are next to.
D. Check that all channels are supported by the APs regardless of client capabilities.
E. Verify that the network traffic of physical data rate and packet loss meets user requirements.
Correct Answer: BE

QUESTION 7
Refer to the exhibit.
300-360 dumps
While testing the post-deployment WLAN network you discover that an AP has been placed in a difficult area. The AP cannot be moved easily because of various requirements. The client performance of various Apple and Microsoft operating system-based products does not meet expectations.
Which two options can help mitigate the performance issue? (Choose two.)
A. Add additional APs.
B. Increase the AP power level to maximum.
C. Rotate the AP 90 degrees to change antenna polarity.
D. Replace the AP with an AP and external antenna.
E. Change the AP location to one that is less RF hostile.
Correct Answer: AD

QUESTION 8
An engineer would like to calibrate the RF environment to improve accuracy.
Which wireless attribute is added to the foor-level calculation by calibrating the foor?
A. attenuation
B. TX power
C. multipath
D. SNR
Correct Answer: A

QUESTION 9
An engineer is performing a predictive wireless design for a Parts Distribution Center which requires data and location services. Which three requirements are inputs to the design? (Choose three.)
A. access points with directional antennas
B. continuous -67 dBm coverage from one access point
C. overlapping -75 dBm coverage from three access points
D. overlapping -67 dBm coverage from two access points
E. access points in IPS mode
F. continuous -72 dBm coverage from one access point
G. accesspointsincornersandalongperimeters
Correct Answer: BCG

QUESTION 10
A customer is deploying a Greenfield 802.11ac network on a foor that will support approximately 300 wireless devices.
Which setting needs to be changed on Prime Infrastructure Planning Tool in order to predict the amount of access points the customer needs to service the new foor?
A. Data Coverage Support Margin
B. Demand Settings
C. Add AP Field
D. 802.11n Protocol Support
Correct Answer: B

QUESTION 11
Which two options describe best practices that must be completed after a wireless installation is finished? 300-360 dumps (Choose two.)
A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.
B. Consult with the customer to ensure that the IT staff has a complete set of design and installation documents.
C. Make sure the customer is aware that they should consider purchasing a support contract immediately after the installation is complete.
D. Spend time with the customer to show them the controller GUI and inform them how they can reach the Cisco TAC if they have any problems.
E. Test all the customer’s wireless devices and applications to ensure they are working properly.
Correct Answer: BE

QUESTION 12
An engineer is preparing for an outdoor wireless survey to mesh connect a distant remote building to a connected building.
Which two types of antennas are appropriate for this application? (Choose two.)
A. circular polarized
B. patch
C. dish
D. Yagi
E. omni
Correct Answer: CD

What Our Customers Are Saying:

300-360 dumps
The best and most updated latest Cisco CCNP Wireless 300-360 dumps exam practice files in PDF format free download from lead4pass. High quality Cisco CCNP Wireless https://www.lead4pass.com/300-360.html dumps pdf training resources which are the best for clearing 300-360 exam test, and to get certified by Cisco CCNP Wireless. It is the best choice for you to pass Cisco 300-360 exam test easily.

Latest Cisco CCNP Wireless 300-360 dumps vce youtube: https://youtu.be/a0loHm1Pu4I

Why Choose Lead4pass?

High quality IT learning materials offered by the best provider lead4pass. From the following picture, you can see there is a difference between lead4pass and other brands. Other brands started earlier, but the questions are not the latest and it is very expensive. Lead4pass provide the cheapest and newest questions with high pass rate.

Dailynewsengine